---

The 100 Watt battery charger contains the required discharge circuitry and cooling fan needed to recondition nickel cadmium and nickel metal hydride batteries. Designed to function as a standard battery charger most of the time, it can be switched to recondition mode for routine maintenance of nickel type batteries.

Specifications:

Benchmark : 70 Minute Charge Time (12 Volt, 5 Amp Hour, NiCd Battery)

Battery Types : Services NiCd, NiMH, Lithium-Ion and SLA type chemistries.

Output Current : 8 Amps Maximum. Application Dependent.

Output Voltage : 10 - 50 VDC. Application Dependent.

Discharge Power : 50 Watts max.

Status Indicator : Red - Discharging    Green - Charging   Flashing Green - Done

Operating Mode Indicator : Red - Recondition Mode   Green - Charger Mode

Switch : Mode Selector. Selects between Charge or Recondition Mode.

Charge Methods : For NiCd and NiMH batteries - Constant Current with multiple redundant full charge detection. For Lithium-Ion and SLA batteries - Constant Voltage with current limit

Power Requirements : 90 - 135 or 180 - 260 VAC, 50 - 60 Hz. 2 Amps max.

Operating Temperature : Recommended 0 to 30 degrees Celsius. 50 degrees max.

Size : 7.0 x 5.0 x 2.5 inches, L x W x H.

Weight : Approximately 3.5 lbs.

Case Material : Heavy Duty 0.100" aluminum with black powder coat finish.

Connections : Detachable AC power cord and XLR output connector.

Warranty : 1 year against defective parts and workmanship