The 2406 single channel battery analyzer / battery tester can determine the condition and capacity of your rechargeable batteries and maximize the life of your nickel cadmium and nickel metal hydride chemistries.
Product Features & Specifications
Description
The 2406 single channel battery analyzer / battery tester can determine the condition and capacity of your rechargeable batteries and maximize the life of your nickel cadmium and nickel metal hydride chemistries.
User Manual and Specifications: 2406A Instruction Manual
Features
- Wide application for testing all types of rechargeable batteries such as NiCd, NiMH, SLA and Lithium ion. The analyzer’s software can be upgraded to accommodate new battery technologies as they emerge.
- Highly effective reconditioner for NiCd batteries. The renew function dissolves crystalline formations formed by low rate chargers and balances the cells within the pack to maximize its capacity and prevent cell reversal.
- Quick test feature is especially useful to users who need to know the relative condition of a battery within 2 to 12 minutes. The quick test performs a series of short load tests and charge cycles to determine whether a battery is good or bad.
- Advanced charge algorithms for each chemistry assure complete and rapid charging without overcharge. Damaged batteries are identified immediately.
- Extensive range for batteries from 250 mAh to 60 Ah in capacity, from 1.2 – 16 Volts in voltage.
- Stores test results of capacity and average discharge voltage for two batteries. Capacities are shown in percent format for easy reading.
Specifications
| Battery Types | Services NiCd, NiMH, Lithium-Ion and SLA type chemistries |
| Output Power | 140 Watts |
| Output Voltage | 0 – 24 Volts |
| Output Current | 0 – 6.375 Amps |
| Discharge Power | 140 Watts |
| Discharge Voltage | 2.0 – 16 Volts |
| Discharge Current | 0 – 6.375 Amps |
| Accuracy | +/- 0.5% |
| Indicators | Power/Off Charge/Discharge Pass/Fail Done/Working |
| Charge Methods | For NiCd and NiMH batteries – Constant Current with multiple redundant full charge detection. For Lithium-Ion and SLA batteries – Constant Voltage with current limit |
| Power Requirement | 120 VAC, 60 Hz, 3 Amps max. Note : This unit does not incorporate world wide AC input |
| Operating Temperature | Recommended 10 to 40 degrees Celsius |
| Size | 9.5 x 8.4 x 2.6 inches, L x W x H |
| Weight | Approximately 8.0 lbs |
| Case Material | Heavy 0.060″ aluminum with black anodized finish |
| Connections | Detachable AC power cord and XLR output connector with alligator clip leads are included with purchase |
| Warranty | 1 year against defective parts and workmanship |
Start Analyzing with the 2406 Single Channel Battery Analyzer