Battery Charger – Single Channel

100 Watt Charger / Reconditioner

Single Channel Battery Charger

The 100 Watt battery charger contains the required discharge circuitry and cooling fan needed to recondition nickel cadmium and nickel metal hydride batteries. Designed to function as a standard battery charger most of the time, it can be switched to recondition mode for routine maintenance of nickel type batteries.

Buy Now!

Product Description & Specifications

Description

The 100 Watt battery charger contains the required discharge circuitry and cooling fan needed to recondition nickel cadmium and nickel metal hydride batteries. Designed to function as a standard battery charger most of the time, it can be switched to recondition mode for routine maintenance of nickel type batteries.

For more information or technical questions please contact our sales engineer:

Randy Smith
Tel: 519-896-5214
Email: randy@esi-technology.com

Specifications

Benchmark 70 Minute Charge Time (12 Volt, 5 Amp Hour, NiCd Battery)
Battery Types Services NiCd, NiMH, Lithium-Ion and SLA type chemistries
Output Current 8 Amps Maximum. Application Dependent
Output Voltage 10 – 50 VDC. Application Dependent
Discharge Power 50 Watts max
Status Indicator Red – Discharging    Green – Charging    Flashing Green – Done
Operating Mode Indicator Red – Recondition Mode    Green – Charger Mode
Switch Mode Selector. Selects between Charge or Recondition Mode
Charge Methods For NiCd and NiMH batteries – Constant Current with multiple redundant full charge detection. For Lithium-Ion and SLA batteries – Constant Voltage with current limit
Power Requirements 90 – 135 or 180 – 260 VAC, 50 – 60 Hz. 2 Amps max
Operating Temperature Recommended 0 to 30 degrees Celsius. 50 degrees max
Size 7.0 x 5.0 x 2.5 inches, L x W x H
Weight Approximately 3.5 lbs
Case Material Heavy Duty 0.100″ aluminum with black powder coat finish
Connections Detachable AC power cord and XLR output connector
Warranty 1 year against defective parts and workmanship

200 Watt Charger / Reconditioner

Single Channel Battery Charger

The 200 Watt battery charger contains the required discharge circuitry and cooling fan needed to recondition nickel cadmium and nickel metal hydride batteries. Designed to function as a standard battery charger most of the time, it can be switched to recondition mode for routine maintenance of nickel type batteries.

Buy Now!

Product Description & Specifications

Description

The 200 Watt battery charger contains the required discharge circuitry and cooling fan needed to recondition nickel cadmium and nickel metal hydride batteries. Designed to function as a standard battery charger most of the time, it can be switched to recondition mode for routine maintenance of nickel type batteries.

For more information or technical questions please contact our sales engineer:

Randy Smith
Tel: 519-896-5214
Email: randy@esi-technology.com

Specifications

Benchmark 40 Minute Charge Time (12 Volt, 5 Amp Hour, NiCd Battery)
Battery Types Services NiCd, NiMH, Lithium-Ion and SLA type chemistries
Output Current 10 Amps Maximum. Application Dependent
Output Voltage 10 – 50 VDC. Application Dependent
Discharge Power 50 Watts max
Status Indicator Red – Discharging    Green – Charging    Flashing Green – Done
Operating Mode Indicator Red – Recondition Mode    Green – Charger Mode
Switch Mode Selector. Selects between Charge or Recondition Mode
Charge Methods For NiCd and NiMH batteries – Constant Current with multiple redundant full charge detection. For Lithium-Ion and SLA batteries – Constant Voltage with current limit
Power Requirements 90 – 135 or 180 – 260 VAC, 50 – 60 Hz. 3 Amps max
Operating Temperature Recommended 0 to 30 degrees Celsius. 50 degrees max
Size 7.0 x 5.0 x 2.5 inches, L x W x H
Weight Approximately 4.0 lbs
Case Material Heavy Duty 0.100″ aluminum with black powder coat finish
Connections Detachable AC power cord and XLR output connector
Warranty 1 year against defective parts and workmanship

Start Charging with the 100 or 200 Watt Charger / Reconditioner